| Reaching under furniture | The 79.8mm body uses StarSight 2.0 without a protruding top lidar tower. It does not need to retract that tower to enter low spaces. | VersaLift lowers the top sensor to give an 89mm body height; with it raised, height is 111mm. Use the retracted measurement when assessing low furniture. |
|---|
Clearances around 8–9cm are a reason to examine Roborock first. Equal robot and furniture measurements do not guarantee passage: allow for sagging upholstery, protrusions and rug thickness. Roborock Korea ↗ · Roborock ↗ · Dreame ↗ |
| Single steps versus two-step thresholds | The Korean specification is up to 4cm across a two-step threshold using AdaptiLift. This does not promise a 4cm vertical single-step climb. | The Korean FAQ specifies up to 4.2cm for a single step. The advertised 6cm is a combined two-step height; the official footnote requires a gap greater than 4cm between steps. |
|---|
Measure the step top and spacing as well as its height. Surface grip changes the result, and Dreame advises avoiding soft play mats. A climbing specification does not establish compatibility with a particular mat. Roborock Korea ↗ · Dreame Korea ↗ · Dreame ↗ |
| Brushes and actual pickup | DuoDivide uses two short rollers to guide hair toward the central opening. The overseas Saros 10R recovered 80% in the carpet-sand test. | HyperStream uses a dual-brush arrangement. X50 Ultra recovered 83% in the same Vacuum Wars carpet-sand comparison. |
|---|
Pa describes advertised suction pressure, not a floor-cleaning percentage. Brush contact, airflow and routing also matter. The 3 percentage-point test difference cannot be generalized to every Korean home. Roborock Korea ↗ · Dreame ↗ · Vacuum Wars ↗ |
| Avoiding small objects | RGB imaging and 3D ToF support obstacle detection. The overseas Saros 10R avoided 24 of 24 obstacles in Vacuum Wars’ comparison. | RGB imaging and 3D structured light support detection. X50 Ultra avoided 20 of 24 obstacles in the same test. |
|---|
The result favors considering Roborock where objects often remain on the floor. It does not guarantee avoidance of every thin cable or pet accident; clearing the cleaning route still helps. Roborock Korea ↗ · Dreame ↗ · Vacuum Wars ↗ |
| Mopping alongside carpets | Two spinning pads include an extending edge mop. Roborock specifies up to 22mm of lift when the body also rises, plus automatic mop removal enabled in the app. | Two spinning pads include edge extension. Dreame specifies up to 10.5mm mop lift and can leave the mops at the dock before vacuuming long-pile carpet. |
|---|
The lift measurements use different conditions. In the overseas comparison Roborock handled dried stains better, while Dreame left less water. Removing the pads is useful for rugs sensitive to moisture. Roborock Korea ↗ · Dreame ↗ · Vacuum Wars ↗ |
| Dock dimensions and access | The standard dock measures 381mm wide × 475mm deep × 488mm high. Add space to lift the water tanks out and remove the washing components. | The X50 Ultra dock measures 340mm wide × 457mm deep × 590mm high. Dreame’s docking guidance recommends 1.5m clear in front and 0.5m on each side. |
|---|
A narrower dock does not necessarily need a smaller installation area. Account for nearby doors, the robot’s approach and overhead access to the tank handles. Roborock Korea ↗ · Dreame ↗ · Dreame Support ↗ |
| Work left after automatic cleaning | Dust emptying, mop washing, drying and detergent dosing are automatic. The removable washing area can be cleaned, but refilling water, emptying wastewater and checking sensors and wheels remain manual tasks. | Dust emptying, washing, drying and detergent dosing are supported. DryBoard cleaning does not replace tank handling, tray and filter checks or removing trapped hair. |
|---|
Both need replacement bags, filters, pads, brushes and suitable detergent. Up to 80°C describes dock mop-washing conditions; it does not mean the robot washes or disinfects the floor at 80°C. Roborock Korea ↗ · Dreame ↗ · Thinkware Mobile / Roborock ↗ |
| Korean options and the Complete bundle | This is the S9 MaxV Slim standard tank configuration. Its tank dock and the separately sold plumbed configuration are different options. | The Korean official name is X50 Ultra. Complete is an overseas accessory package; the Korean X50 Master with plumbing is also a separate model. |
|---|
Compare new tank versions under the same color and service conditions. Do not add overseas warranty terms or Complete consumable quantities to the value of a Korean Ultra order. Roborock Korea ↗ · Thinkware Mobile / Roborock ↗ · Dreame Korea ↗ · Dreame ↗ |
Comments
Respect different opinions. Abuse, personal attacks, private information and spam may be restricted. Comment guidelines · Privacy policy